Full Tutorial for Installing a New Shower Unit

Free Quote

We've stumbled on this article about How to Install a Direct-to-Stud Shower Enclosure below on the internet and concluded it made sense to share it with you on my blog.

An effective shower installment requires careful preparation and a lot of work. In many cases, you will certainly require to do three sorts of jobs: mounting walls, installing the plumbing, as well as finishing walls.

Prep work

First of all, you must select the kind of shower that you desire to mount. It is very important to determine whether the chosen shower is capable of managing particular systems and also can regulate a safe degree of water through the central heating boiler. The majority of shower units nowadays are made to be adaptable to various water pressures (such as kept warm water and cold mains).
It is also important to consider the water stress and the planning of the piping as well as water drainage for the shower

Different Types of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be attached to the bath tap according to your requirement, and also the water temperature level can be readjusted via the faucets. Push-on mixers are cheap and extremely simple to mount. Nevertheless, although the hose link is straightforward, it is easily removed. Additionally, it is bothersome to adjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this sort of shower are combined with a bathroom mixer tap, and also the temperature can be changed via the bathroom faucets. It is a really low-cost option and also no extra plumbing is included. However, the bath/shower mixers likewise experience bothersome temperature control alternatives.

Handbook Mixer: The tube and spray of a manual mixer shower unit belong of the wall surface system and also the cold and hot water products are linked to a single valve The temperature level and also stress of the water are controlled via either one or a selection of knobs (in a lot more costly showers). Although temperature control is much easier in manual mixer types, they are extra costly than the previously stated mixers. They likewise need additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The pipe and spray of this shower kind are a part of the wall system and the cold and hot water products are attached to a single shutoff right here as well. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being also hot. One of the largest benefits of a thermostatic mixer shower type consists of practical temperature control. Nonetheless, it is one of the most expensive of the various mixer choices.

Power Shower: A power shower is a solitary unit including an effective electrical pump that can altering both the water stress and temperature level. This sort of shower can be fitted if there is supply of water from a cold water tank as well as a hot water cyndrical tube. A power shower makes the change of both stress and also temperature level easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix central heating boiler under keys pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is essential to note that for this shower type to be mounted, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature level as well as pressure to be readjusted through a handle. Models with temperature level stabilisers are much better as they remain untouched by other taps somewhere else in operation within the household. A major downside of electric showers is that the control knob just enables the option of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter when the spray is frequently weak as well as the keys water is colder. Nevertheless, this issue is dealt with in some versions which are offered with a winter/summer setting.

Technique

Depending upon the sort of shower you want to install, the shower head have to either be suited order to prevent its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Prior to starting, it is a good idea to mark the positions of the shower head as well as control, as well as to prepare the pipe-work included. In addition, the water drainage system to eliminate the drainage will certainly require to be prepared. Both positions of the cable path as well as the shower switch will certainly also need to be taken into consideration if an instant or electrical shower device is being set up.
Make use of the instruction guide provided with the shower device to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to remove the water. In order to secure the pipes, they should be provided a water resistant covering as well as additionally fitted with separating shutoffs. The pipes can then be hidden right into the wall as well as glued over to neaten the total look.
Fit the base tray, shower head, as well as fittings.
Attach the major shower control to the pipelines that will be supplying the water (This may require a female screw thread adapter).
Reconnect the supply of water and also test the pipelines for any type of leakages, as some might need tightening.
If you are setting up an electric shower, remember to turn off the electrical power supply prior to making any electrical links. As soon as these links have been made (there ought to be support within the instruction manual), the power supply can be switched back on.

Adjusting Water Stress to Fit Your Shower

The cold water reservoir can be lifted to a better height (sometimes as low as 150mm (6inches)) by fitting a strong wooden support below it - perhaps composed of struts as well as blockboards. If you pick this option, the major and distribution pipes will additionally need to be increased to meet the brand-new height of the tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it must be connected into the power supply in order to operate.

Piping and also Drainage

It is best to use 15mm size supply pipelines, and also make the go to the shower as brief and straight as feasible so regarding maintain optimal pressure as well as reduce warm loss. Additionally, by minimising making use of joints for pipeline corners, you can reduce the resistance in the circulation of the water supply. You can achieve this by flexing the pipelines rather.

The Majority Of Usual Blunders

Breaking or ignoring regional code constraints.

Utilizing pipelines that are as well tiny.

Affixing copper to galvanized without using a brass or dielectric fitting between the two.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling up for components.

Cutting supply stub outs as well brief to install the shutoff valves onto after the ended up wall remains in location.

Not correctly straightening tubing into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leakage.).

When transforming the water back on in your house, always run the outside tube valve or purge your toilets to bleed dust and air from the lines. This particles can trigger issues in your sink taps and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I came across that page on How to Build a Shower Enclosure for Your DIY Bathroom while doing a search on the internet. Enjoyed our blog posting? Please share it. Let someone else find it. Thank you for taking the time to read it.

Click Here